Microline T.F.C.-4  Reverse Osmosis removes:

(average % of rejection)

99% Arsenic

97% Barium

98% Cadmium

91% Chromium (Hexavalent)

94% Chromium (Trivalent)

99% Copper

94% Fluoride

99% Lead

80% Nitrate

79% Nitrite

80% Radium

92% Selenium

99.99% Microbiological Cysts

STATE OF WISC PERFORMANCE DATA SHEET MICROLINE R.O. MODEL TFC-4

How Does the Microline TFC-4 Reverse Osmosis work?

The pressure from a household tap forces water through a semipermeable membrane.  This membrane separates your water at the molecular level.  The membrane works like a filter to isolate the contaminants, reducing them so the water becomes purer.

Stage 1:  Prefilter

Sediment Carbon Block filter,  removes chlorine and filters out larger particles protecting the membrane.

Stage 2: TFC Membrane

The operational center of the system.  The membrane removes particles too small to be trapped by the prefilter.  The membrane's microscopic pores allows Hydrogen and Oxygen molecules through, (and water is H2O).  Contaminants are flushed to the drain.

Stage 3:  Post Carbon Filter

Removes any unwanted tastes and odors.

Stage 4:  The Final Polish:

After the membrane the RO water is routed to the holding tank.  When you turn on your faucet and draw water from the holding tank, it then goes through its final stage of filtration, an additional carbon filter to remove any remaining tastes and odors before it reaches your glass.

All materials are FDA and/or NSF compliant

The TFC systems are tested and Certified to ANSI/NSF Standard 58 and has been tested under Industry Standard S-30091 for Total Dissolved Solids reduction and structural integrity. Water Quality Association

TFC-4  Reverse Osmosis

by Microline

Water... The way nature intended